The bike tent is manufactured from Nylon Polyester PP – a quality fabric that is tough and durable, hardwearing and easy to clean.

Our field trials have shown that the material accommodates various printing processes and techniques favourably and shows no sign of colour degradation when exposed to prolonged bright sunlight. The Nylon Polyester PP fabric combined with the flexible fibre-glass rod chassis, have been specifically chosen to provide a lightweight storage solution with added benefits in retail storage and consumer product transportation.

Designed to be quick and easy to install, the bike tent has a detachable zipped front panel providing the owner with the choice of having the front open or closed - very useful in the summer months when rainfall is less prevalent and access is required frequently. The bike tent can be installed in a wide variety of locations against walls and fences. The outer edge of the rear panel has 5 fixing points. Simply connect the main fibreglass rods and slide through two sleeves in the nylon/polyester fabric, inserting the ends into the “feet” in the base panel. Next place the 5 smaller rods into the eyelets in the front and rear panels to stretch the 2 arcs apart. Finally drill up to 5 holes and screw the back panel secure.

A number of weight bags are included as standard. These can be filled with sand or pebbles and placed along the edges of the ground sheet inside to prevent the wind from blowing underneath. The recommended installation, however is to carefully place a number of old paving slabs or wooden blocks over the groundsheet to provide a more permanent and robust solution.